v0.3.0

What's Changed

• Add export and Debug deriving by @JohnAZoidberg in #78
• Update dependencies by @JohnAZoidberg in #79
• Add support for Framework 2nd Gen Event platforms by @JohnAZoidberg in #81
• Add command to toggle tablet mode by @JohnAZoidberg in #82
• fp-brightness: Add support for V1 host command by @JohnAZoidberg in #85
• framework_lib: Add ultra-low powerbutton brightness by @JohnAZoidberg in #83
• Add accelerometer support by @JohnAZoidberg in #86
• chromium: Add device_complete to diags by @JohnAZoidberg in #87
• Add support for RGB command by @JohnAZoidberg in #84
• freebsd: Build with latest stable on gh actions by @JohnAZoidberg in #89
• camera: Print firmware version of camera by @JohnAZoidberg in #88
• camera: Don't crash if something's wrong by @JohnAZoidberg in #93
• touchpad: Show IC type and firmware version by @JohnAZoidberg in #94
• Fix H2O capsule analysis by @JohnAZoidberg in #92
• windows: Upload release binary by @JohnAZoidberg in #99
• windows: Don't panic if driver not installed by @JohnAZoidberg in #100
• framework12: Support reading touchpad version by @JohnAZoidberg in #97
• touchscreen: Dump firmware version and protocol by @JohnAZoidberg in #90
• add commands to read/write gpu serial by @kiram9 in #98
• Add completions for ZSH and Bash by @bsdlme in #96

New Contributors

• @bsdlme made their first contribution in #96

Full Changelog: v0.2.1...v0.3.0

v0.2.1

What's Changed

• ccgx: Format PD version as decimal on 11th Gen by @JohnAZoidberg in #75
• Bump to v0.2.1 by @JohnAZoidberg in #77

Full Changelog: v0.2.0...v0.2.1

v0.2.0

Merge pull request #67 from FrameworkComputer/prep-v0.2.0

Release v0.2.0

DP and HDMI Expansion Card Updater

This is a Linux (and Windows) tool to update the firmware. Should be used in conjunction with our guide at: HDMI Expansion Card power saving rework
The tools here replace the proprietary windows tools linked in the guide.
**NOTE: ** HDMI firmware MUST only be updated if you have done the rework!

The DP and HDMI Expansion cards have a CCG3 PD controller with firmware.
The firmware has two sides so that it can never be bricked. Only one side is active at a time.

Firmware Versions

Card	Version	Note	Compatibility
DP	6	Original Firmware	All revisions
DP	8	Second Firmware Version	All revisions
DP	101	Power Saving Firmware	All revisions
HDMI	5	Original Firmware	Original rev
HDMI	105	Power Saving Firmware	New/reworked
HDMI	106	Power Saving & Bugfix	New/reworked

Check Version

dp_hdmi_version displays the current firmware version.
Example:

> ./dp_hdmi_version 
HDMI Expansion Card
  Serial Number:        11AD1D00B21A3F05471C0B00
  Active Firmware:      104 (3.0.16.104)
  Inactive Firmware:    105 (3.0.16.105)
  Operating Mode:       MainFw (#2)
DisplayPort Expansion Card
  Serial Number:        11AD1D0030123F17142C0B00
  Active Firmware:      101 (3.0.17.101)
  Inactive Firmware:    008 (3.0.17.8)
  Operating Mode:       MainFw (#2)

Update Version

To update a card to a particular version, use the corresponding binary.
It will update all compatible connected cards.
For example:

> ./hdmi_update_105
File Firmware:
  HDMI Expansion Card
  3.0.16.105

Updating HDMI Expansion Card with SN: "11AD1D00B21A3F05471C0B00"
Before Updating
  Active Firmware:      5 (3.0.16.5)
  Inactive Firmware:    5 (3.0.16.5)
  Operating Mode:       BackupFw (#1)
Updating...
  Updating Firmware Image 2
  Firmware Update done.
  Waiting for Expansion Card to restart
After Updating
  Active Firmware:      105 (3.0.16.105)
  Inactive Firmware:    105 (3.0.16.5)
  Operating Mode:       MainFw (#2)

v0.1.0 Alpha

Very early debug builds.