Bug on Exit GB / GBC game via Emulator

[robertvb83]

If a GB/GBC game is exit via L+R and chose Exit in Emulator, this will exit the game but leads to a blank SD card screen where you cannot do anything

Video:
https://youtu.be/cW8AtFMqRPw

[Shadow322]

Power issue flashcards draw a lot of power and your running it on a GBM works fine here on a stock GBA SP AGS-101

[robertvb83]

But with the stock ez flash firmware it works fine... even on a gbm
Is this due to a later version gambatte?

[Shadow322]

But with the stock ez flash firmware it works fine... even on a gbm Is this due to a later version gambatte?

OK I just checked on one my GBM's and it worked fine so it's either a fault of the DE or GBM or both

[robertvb83]

I am not running a DE.. just normal Omega.

Ill try a different SD tomorrow

[Shadow322]

I am not running a DE.. just normal Omega.

Ill try a different SD tomorrow

OK just tried my non DE on my GBM works fine in exiting gb game

[Deko29]

This answer is probably a bit too late, but I had the exact same issue on my normal Omega card, so I created a fork to fix this issue and to make a few other adjustments to my liking. You can find the specified fork and the new firmware binary here: https://github.com/Deko29/SimpleLight
The GB/GBC emulator now waits roughly 5 seconds to make more or less sure, that the save and config data have been written completely, so don't worry if the screen stays white for a longer period then you expect. The blank screen should hopefully not appear again and your savedata should also be fine if it has been deleted (for me it always got deleated when exiting the emulator through that method...)