POGO Connector Pinout Question

[JaredL0gan]

We are interested in using one of the pins on the Clarius L15 to drive an external circuit. We noticed that in the provided fan_schem.pdf in the CAD repository, Pin 2 of the Pogo Connector is labeled FAN_5V, which caught our attention.

Are there any pins on the Clarius L15 which provide a continuous voltage (e.g. 5V) when the transducer is active and the Power Fan is not connected? If so, which pin and what is the voltage and maximum current it provides?

I am specifically searching for a 'continuous' voltage source and not the existing 'sync' pin.

[julien-l]

There is no PIN that provides continuous 5V, other than the FAN_5V.

About the FAN_5V:

FAN_5V is only capable to drive 5V, 100mA. It is meant to provide voltage to clarius fan. The FAN detection mechanism has to be triggered and it will only be powered ON when scanner temperature is above ~35degC or so.