beaglebone: TT3201 CAN Bus Cape MCP2515 fixes#7

Open

dwery wants to merge 620 commits intokoenkooi:3.8-for-panto-rebasefrom

dwery:towertech-tt3201-can-cape

This pull request is big! We're only showing the most recent 250 commits

Commits on May 24, 2013

cape: Added support for IIO helper cape

mranostay
authored and
koenkooi
committed
cape: Added example IIO tester dynamics overlay

mranostay
authored and
koenkooi
committed
docs: Added capemanager extra_override usage

mranostay
authored and
koenkooi
committed
capemgr: Added module param descriptions

mranostay
authored and
koenkooi
committed
beaglebone: Add Adafruit RTC prototype cape

mranostay
authored and
koenkooi
committed
cape: vsense-scale division by zero check

mranostay
authored and
koenkooi
committed
capes: add cape for beaglebone based Hexy robot
koenkooi
committed
Extend bone-iio helper

pantoniou
authored and
koenkooi
committed
Update iio helper with more channels

pantoniou
authored and
koenkooi
committed
Add ADC IIO helper

pantoniou
authored and
koenkooi
committed
Changing DT data to make selection of standard (i.e. non-reduced blanking) modes the default

DarrenEtheridge
authored and
koenkooi
committed
Enhancing to support extra device tree options for tilcdc: ti,max_width (maximum width in pixels) ti,max_pixelclock (maximum allowable pixel clock for the device) also added some extra debugging en…

DarrenEtheridge
authored and
koenkooi
committed
add WIP support LCD4 rev 00A4
koenkooi
committed
add eMMC cape support
koenkooi
committed
Remove UART pins from the expansion set

pantoniou
authored and
koenkooi
committed
Remove LCD pins from the expansion test part

pantoniou
authored and
koenkooi
committed
Remove I2C2 pins from expansion test

pantoniou
authored and
koenkooi
committed
Add expansion test cape fragment.

pantoniou
authored and
koenkooi
committed
tilcdc added some extra debug, and softened the wording of the debug messages when deciding if a mode is supported or not

DarrenEtheridge
authored and
koenkooi
committed
Make sure various timings fit within the bits available in the LCD controller, otherwise prune the mode. Also adjust the timing values to behave as the TRM indicates with 0 representing 1 in some c…

DarrenEtheridge
authored and
koenkooi
committed
fix cape-bone-hexy
koenkooi
committed
firmware: DT Fragment for MRF24J40 BeagleBone Cape

signal11
authored and
koenkooi
committed
firmware: capes: Update MRF24J40 cape to work with latest bone dtsi

signal11
authored and
koenkooi
committed
am335x-bone-common: DT Override for MRF24J40 Cape

signal11
authored and
koenkooi
committed
beaglebone black: limit LDO3 to 1.8V
koenkooi
committed
beaglebone black: add new fixed regulator for uSD/eMMC
koenkooi
committed
capemgr: Implement disable overrides on the cmd line

pantoniou
authored and
koenkooi
committed
tilcdc: Enable pinmux states

pantoniou
authored and
koenkooi
committed
cape: Add a simple cape for handling the uSD button.

pantoniou
authored and
koenkooi
committed
beaglebone: add support for DVI 00A3
koenkooi
committed
beaglebone: remove audio section from DVID rev 2 and 3 capes
koenkooi
committed
beaglebone: add dts for audio cape
koenkooi
committed
cape-bone-hexy: add iio helper
koenkooi
committed
cape: Add CAPE-BONE-EXPTEST to capemaps

pantoniou
authored and
koenkooi
committed
tester: button cape

pantoniou
authored and
koenkooi
committed
pwm_test: fix some issues

jackmitch
authored and
koenkooi
committed
pwm_test: Clean-up and make it work on DT correctly

pantoniou
authored and
koenkooi
committed
capes: Add PWM test example cape

pantoniou
authored and
koenkooi
committed
Sync tester DTS with am335x-common

pantoniou
authored and
koenkooi
committed
Add in missing cape-bone-tester back in.

pantoniou
authored and
koenkooi
committed
cape-bone-hexy: move OLED to different reset gpio
koenkooi
committed
firmware/capes: added dts file for every PWM pin

Jason Kridner
authored and
koenkooi
committed
capes: add LCD7 A3
koenkooi
committed
capes: add basic support for LCD4 capes
koenkooi
committed
OF-overlay: Add depth option for device creation.

pantoniou
authored and
koenkooi
committed
capes: Add BB-BONE-GPEVT cape

pantoniou
authored and
koenkooi
committed
clock: Export __clock_set_parent

pantoniou
authored and
koenkooi
committed
omap-clk: Add adjustable clkout2

pantoniou
authored and
koenkooi
committed
am33xx: Update DTS EDMA

pantoniou
authored and
koenkooi
committed
bone: Added RS232 prototype cape DT object

mranostay
authored and
koenkooi
committed
Add support for BB-BONE_SERL-01-00A1 CanBus cape

bearsh
authored and
koenkooi
committed
v3.8.13-not-capebus
koenkooi
committed
uio: uio_pruss: port to AM33xx

mranostay
authored and
koenkooi
committed
ARM: omap: add DT support for deasserting hardware reset lines

mranostay
authored and
koenkooi
committed
ARM: dts: AM33xx PRUSS support

mranostay
authored and
koenkooi
committed
uio_pruss: add dt support (replicape-00A1)

Elias Bakken
authored and
koenkooi
committed
pruss: Make sure it works when no child nodes are present

pantoniou
authored and
koenkooi
committed
am33xx: pru: Very simple led cape via GPO of the PRU

pantoniou
authored and
koenkooi
committed
PRU remote proc wip

pantoniou
authored and
koenkooi
committed
Add sysfs entry for DDR sync

cmicali
authored and
koenkooi
committed
v3.8.13-pru
koenkooi
committed
drivers: usb: phy: add a new driver for usb part of control module

kishon
authored and
koenkooi
committed
drivers: usb: start using the control module driver

kishon
authored and
koenkooi
committed
usb: otg: Add an API to bind the USB controller and PHY

kishon
authored and
koenkooi
committed
usb: otg: utils: add facilities in phy lib to support multiple PHYs of same type

kishon
authored and
koenkooi
committed
ARM: OMAP: USB: Add phy binding information

kishon
authored and
koenkooi
committed
drivers: usb: musb: omap: make use of the new PHY lib APIs

kishon
authored and
koenkooi
committed
usb: otg: add device tree support to otg library

kishon
authored and
koenkooi
committed
USB: MUSB: OMAP: get PHY by phandle for dt boot

kishon
authored and
koenkooi
committed
MUSB: Hack around to make host port to work.

pantoniou
authored and
koenkooi
committed
make sure we register/unregister the NOP xceiver only once

Hahalollol
authored and
koenkooi
committed
ARM: OMAP: am335x: musb use 250 for power

RobertCNelson
authored and
koenkooi
committed
ARM: OMAP2: MUSB: Specify omap4 has mailbox

kishon
authored and
koenkooi
committed
v3.8.13-usb
koenkooi
committed
beaglebone black: 1ghz hack
koenkooi
committed
v3.8.13-PG2
koenkooi
committed
ARM: AM33xx: Add SoC specific restart hook

handyjsabeaudry
authored and
koenkooi
committed
v3.8.13-reboot
koenkooi
committed
iio:common: Add STMicroelectronics common library

cioccad
authored and
koenkooi
committed
iio:accel: Add STMicroelectronics accelerometers driver

cioccad
authored and
koenkooi
committed
iio:gyro: Add STMicroelectronics gyroscopes driver

cioccad
authored and
koenkooi
committed
iio:magnetometer: Add STMicroelectronics magnetometers driver

cioccad
authored and
koenkooi
committed
iio:magn: Add sensors_supported in st_magn_sensors

ciocca-d
authored and
koenkooi
committed
pwm-pca9685: skeleton i2c client driver for PCA9685 16 channel PWM driver
koenkooi
committed
v3.8.13-iio
koenkooi
committed
W1: w1-gpio - switch to using dev_pm_ops

dtor
authored and
koenkooi
committed
W1: w1-gpio - guard DT IDs with CONFIG_OF

dtor
authored and
koenkooi
committed
W1: w1-gpio - rework handling of platform data

dtor
authored and
koenkooi
committed
W1: w1-gpio - switch to using managed resources (devm)

dtor
authored and
koenkooi
committed
v3.8.13-w1
koenkooi
committed
ARM: OMAP: Clear GPMC bits when applying new setting.

Mark Jackson
authored and
koenkooi
committed
ARM: omap2: gpmc: Mark local scoped functions static

ezequielgarcia
authored and
koenkooi
committed
ARM: omap2: gpmc: Remove unused gpmc_round_ns_to_ticks() function

ezequielgarcia
authored and
koenkooi
committed
ARM: omap2: gpmc: Fix gpmc_cs_reserved() return value

ezequielgarcia
authored and
koenkooi
committed
ARM: omap2: gpmc-nand: Print something useful on CS request failure

ezequielgarcia
authored and
koenkooi
committed
ARM: omap2: gpmc-onenand: Print something useful on CS request failure

ezequielgarcia
authored and
koenkooi
committed
ARM: omap2: gpmc-onenand: Replace pr_err() with dev_err()

ezequielgarcia
authored and
koenkooi
committed
ARM: omap2: gpmc-onenand: Replace printk KERN_ERR with dev_warn()

ezequielgarcia
authored and
koenkooi
committed
ARM: omap2: gpmc: Remove redundant chip select out of range check

ezequielgarcia
authored and
koenkooi
committed
ARM: OMAP2+: Simplify code configuring ONENAND devices

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Add variable to store number of GPMC waitpins

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Add structure for storing GPMC settings

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Add function for configuring GPMC settings

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Add function to read GPMC settings from device-tree

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Add additional GPMC timing parameters

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Add device-tree support for NOR flash

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Detect incorrectly aligned GPMC base address

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails

Jon Hunter
authored and
koenkooi
committed
ARM: OMAP2+: return -ENODEV if GPMC child device creation fails

Javier Martinez Canillas
authored and
koenkooi
committed
ARM: OMAP2+: rename gpmc_probe_nor_child() to gpmc_probe_generic_child()

Javier Martinez Canillas
authored and
koenkooi
committed
ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes

Javier Martinez Canillas
authored and
koenkooi
committed
mtd: omap-nand: pass device_node in platform data

zonque
authored and
koenkooi
committed
ARM: OMAP: gpmc-nand: drop __init annotation

zonque
authored and
koenkooi
committed
ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs

zonque
authored and
koenkooi
committed
ARM: OMAP: gpmc: don't create devices from initcall on DT

zonque
authored and
koenkooi
committed
ARM: OMAP2+: gpmc-onenand: drop __init annotation

ezequielgarcia
authored and
koenkooi
committed
gpmc: Add missing gpmc includes.

pantoniou
authored and
koenkooi
committed
mtd: omap-onenand: pass device_node in platform data

ezequielgarcia
authored and
koenkooi
committed
ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()

Jon Hunter
authored and
koenkooi
committed
omap: gpmc: Various driver fixes

pantoniou
authored and
koenkooi
committed
gpmc: Add DT node for gpmc on am33xx

pantoniou
authored and
koenkooi
committed
v3.8.13-gpmc
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - refactor i2c error handling

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - register input device before request_irq

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - refactor input device creation

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - handle bootloader mode at probe

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - handle errors during fw update

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - destroy state before fw update and restore after

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - refactor bootloader entry/exit

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - wait for CHG after bootloader resets

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - change MXT_BOOT_LOW to 0x26

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Increase FWRESET_TIME

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add calibrate sysfs entry

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add sysfs entry to read config checksum

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add sysfs entry to read info checksum

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - verify info block checksum

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_tx - add matrix_size sysfs entry

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - define helper functions for size and instances

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add debugfs infrastructure

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add deltas and refs debugfs entries

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add device id for touchpad variant

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Read resolution from device memory

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Report TOUCH MAJOR in terms of pixels

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add new object types

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: INPUT: atmel_mxt_ts - Increase the wait times for backup and reset

Iiro Valkonen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - dump mxt_read/write_reg

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - take an instance for mxt_write_object

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - allow writing to object sysfs entry

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add backupnv sysfs entry

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - read num messages, then all messages

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - remove mxt_make_highchg

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Remove matrix size update

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - parse vector field of data packets

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Add IDLE/DEEP-SLEEP modes when suspend

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Move object from sysfs to debugfs

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Set default irqflags when there is no pdata

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Support the case with no platform data

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Wait on auto calibration msg in suspend

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Add sysfs entry for r/w fw file name

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Add sysfs entry for r/w config file name

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - add sysfs entry for writing a config file

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - make mxt_initialize async

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - move backup_nv to handle_pdata

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Add defines for T9 Touch Control

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - disable reporting on stop

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Suppress handle messages used for resume

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - save and restore t9_ctrl on wakeup disabled

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - enable RPTEN if can wakeup from suspend

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - release all fingers on resume

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - make suspend power acquisition interval configurable

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - recalibrate on system resume

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts: Use correct max touch_major in mxt_release_all_fingers()

yufengshen
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Add support for T65, Lensbending Correction

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts : On Tpads, enable T42, disable T19 on suspend

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts : Set power/wakeup to disabled by default.

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - mxt_stop on lid close

bleungatchromium
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Disable T9 on mxt_stop

djkurtz
authored and
koenkooi
committed
CHROMIUM: Input: atmel_mxt_ts - Set T9 in mxt_resume based on lid state

bleungatchromium
authored and
koenkooi
committed
v3.8.13-mxt
koenkooi
committed
video: ssd1307fb: Add support for SSD1306 OLED controller

mripard
authored and
koenkooi
committed
ssd1307fb: Rework the communication functions

mripard
authored and
koenkooi
committed
ssd1307fb: Speed up the communication with the controller

mripard
authored and
koenkooi
committed
ssd1307fb: Make use of horizontal addressing mode

mripard
authored and
koenkooi
committed
SSD1307fb: 1Hz -> 8Hz defio updates
koenkooi
committed
v3.8.13-ssd130x
koenkooi
committed
ARM: force -march=armv7a for thumb2 builds - http://lists.linaro.org/pipermail/linaro-dev/2011-August/006752.html
koenkooi
committed
headers_install: Fix build failures on deep directory hierarchy

pantoniou
authored and
koenkooi
committed
v3.8.13-build
koenkooi
committed
video: Add generic HDMI infoframe helpers

Thierry Reding
authored and
koenkooi
committed
BeagleBone Black TDA998x Initial HDMI Audio support

DarrenEtheridge
authored and
koenkooi
committed
Clean up some formating and debug in Davinci MCASP driver

DarrenEtheridge
authored and
koenkooi
committed
tilcdc: Prune modes that can't support audio.

pantoniou
authored and
koenkooi
committed
Enable output of correct AVI Infoframe type hdmi

DarrenEtheridge
authored and
koenkooi
committed
drm: am335x: add support for 2048 lines vertical

DarrenEtheridge
authored and
koenkooi
committed
drm: tda998x Adding extra CEA mode for 1920x1080@24

DarrenEtheridge
authored and
koenkooi
committed
tilcdc: Remove superfluous newlines from DBG messages

pantoniou
authored and
koenkooi
committed
tilcdc: 1280x1024x60 bw > 1920x1080x24 bw

pantoniou
authored and
koenkooi
committed
tilcdc: Only support Audio on 50 & 60 Hz modes

pantoniou
authored and
koenkooi
committed
v3.8.13-hdmi
koenkooi
committed
boneblack: Remove default pinmuxing for MMC1

pantoniou
authored and
koenkooi
committed
capemgr: Implement cape priorities

pantoniou
authored and
koenkooi
committed
rstctl: Reset control subsystem

pantoniou
authored and
koenkooi
committed
omap_hsmmc: Enable rstctl bindings.

pantoniou
authored and
koenkooi
committed
bone: Add rstctl DT binding for beaglebone

pantoniou
authored and
koenkooi
committed
bone-eMMC: Add rstctl rstctl DT bindings

pantoniou
authored and
koenkooi
committed
capes: Add testing capes for rstctl

pantoniou
authored and
koenkooi
committed
omap_hsmmc: Bail out when rstctl error is unrecoverable

pantoniou
authored and
koenkooi
committed
bone: Put priorities in built-in capes

pantoniou
authored and
koenkooi
committed
bone-common dtsi: remove reset cape
koenkooi
committed
v3.8.13-resetctrl
koenkooi
committed
soc_camera: QL/mt9l112 camera driver for the beaglebone

pantoniou
authored and
koenkooi
committed
capes: Add BB-BONE-CAM3 cape

pantoniou
authored and
koenkooi
committed
cssp_camera: Correct license identifier

pantoniou
authored and
koenkooi
committed
cssp_camera: increase delays make sensor detection work better
koenkooi
committed
mt9t112: forward port optimizations from Angstrom 3.2 kernel
koenkooi
committed
cssp_camera: Use flip if available.

pantoniou
authored and
koenkooi
committed
cssp_camera: Fix it for small resolutions

pantoniou
authored and
koenkooi
committed
cssp_camera: Increase delay after enabling clocks to 100ms

pantoniou
authored and
koenkooi
committed
Debugging camera stuff

pantoniou
authored and
koenkooi
committed
cssp_camera: Make it work with Beaglebone black

pantoniou
authored and
koenkooi
committed
v3.8.13-camera
koenkooi
committed
bone: capemgr: Introduce simple resource tracking

pantoniou
authored and
koenkooi
committed
capes: Add resources to capes.

pantoniou
authored and
koenkooi
committed
capes: Update most of the capes with resource definitions

pantoniou
authored and
koenkooi
committed
capes: Update RS232 + CAN capes with resources

pantoniou
authored and
koenkooi
committed
v3.8.13-resources
koenkooi
committed
add 'defconfig' file to use as .config
koenkooi
committed
Add proper db.txt for CRDA
koenkooi
committed
add PM firmware
koenkooi
committed

Commits on May 25, 2013

mcp251x: add device tree support
Alessandro Zummo
committed
capes: Add TowerTech TT3201 CAN Bus Cape (TT3201-001, 3 channels) Rev 01 and 02
Alessandro Zummo
committed

Commits on May 27, 2013

capes: TT3201 version fix (2 -> 5)
Alessandro Zummo
committed

Commits on May 28, 2013

capes: fixed TT3201 CAN Bus cape
Alessandro Zummo
committed
capes: Add TT3201 to Makefile
Alessandro Zummo
committed
mcp251x: register irq with can device name
Alessandro Zummo
committed

Commits on Jun 17, 2013

fixed formatting
Alessandro Zummo
committed

Commits on Jun 27, 2013

mcp251x: makes kernel happier by avoid sleeping in interrupts
Alessandro Zummo
committed

Commits on Jun 28, 2013

mcp251x: try to read more packets per irq
Alessandro Zummo
committed

Commits on Oct 4, 2013

Added device tree support for TT3201 rev 5
Alessandro Zummo
committed
mcp2515: new driver with device tree support, suitable for TowerTech TT3201
Alessandro Zummo
committed

Commits on Oct 7, 2013

mcp2515: added ids, moved module information
Alessandro Zummo
committed