Skip to content

Add PMIC Related Features for KNP#674

Open
yijiyang wants to merge 6 commits intoqualcomm-linux:tech/all/dt/kaanapalifrom
yijiyang:tech/all/dt/kaanapali
Open

Add PMIC Related Features for KNP#674
yijiyang wants to merge 6 commits intoqualcomm-linux:tech/all/dt/kaanapalifrom
yijiyang:tech/all/dt/kaanapali

Conversation

@yijiyang
Copy link

No description provided.

jprakash-qc and others added 6 commits February 13, 2026 11:14
Add a spmi-pmic-arb device for the SPMI PMIC arbiter found on Kaanapali.
It has two subnodes corresponding to the SPMI0 bus controller and the
SPMI1 bus controller.

Also add dtsi files for PMH0104, PMH0110, PMD8028, PMIH0108, PMR735D
and PM8010 along with temp-alarm and GPIO nodes under them, which are
needed on Kaanapali.

Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Include PMIC files used on Kaanapali MTP boards. Add configurations for
keys (volume up and volume down), RGB LEDs and flash LEDs.

Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Include PMIC files used on Kaanapali QRD boards. Add configurations for
keys (volume up and volume down), RGB LEDs and flash LEDs.

Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Enable bluetooth WCN785x and Wi-Fi on Kaanapali MTP board.

Co-developed-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Add MDSS/MDP/DSI controllers and DSI PHYs for Kaanapali. DP controllers
are not included.

Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Enable MDSS/DPU/DSI0 and add Novatek NT37801 panel on Kaanapali MTP
board.

NT37801 Spec V1.0 chapter "5.7.1 Power On Sequence" states VDDI ranges
1.65V~1.95V, but ldo12 ranges 1.2V~1.8V, so change ldo12 range to
1.65V~1.8V.

Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
@qcomlnxci qcomlnxci requested a review from a team February 13, 2026 03:22
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants