Open
Conversation
…t for Monaco EVK Enable PCA9538 expander as interrupt controller on Monaco EVK and configure the corresponding TLMM pins via pinctrl to operate as GPIO inputs with internal pull-ups. Link: https://lore.kernel.org/all/20260210155329.3044455-2-swati.agarwal@oss.qualcomm.com/ Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
…oller Enable the tertiary usb controller connected to micro usb port in OTG mode on Monaco EVK platform. Link: https://lore.kernel.org/all/20260210155329.3044455-3-swati.agarwal@oss.qualcomm.com/ Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
… in host mode Enable primary USB controller in host mode on monaco EVK Platform. Primary USB controller is connected to a Genesys Logic USB HUB GL3590 having 4 ports. The ports of hub that are present on lemans EVK standalone board are used as follows:- 1) port-1 is connected to HD3SS3220 Type-C port controller. 2) port-4 is used for the M.2 E key on corekit. Standard core kit uses UART for Bluetooth. This port is to be used only if user optionally replaces the WiFi card with the NFA765 chip which uses USB for Bluetooth. Remaining 2 ports will become functional when the interface plus mezzanine board is stacked on top of corekit: 3) port-2 is connected to another hub which is present on the mezz through which 4 type-A ports are connected. 4) port-3 is used for the M.2 B key for a 5G card when the mezz is connected. Mark the second USB controller as host only capable and add the HD3SS3220 Type-C port controller along with Type-c connector for controlling vbus supply. In hardware, there are dip switches provided to operate between USB port 0 and port 1 for primary Type-C USB controller. By default, switches will be off operating at USB0 port. After bootup to HLOS, it will be operated in USB1 port. Added support in the software for both HS and SS switches as usb1-hs-high-gpio14 and usb1-ss-high-gpio5. Also, added bootup-high-gpio7 pin for USB1 hub reset to get detected after bootup. Link: https://lore.kernel.org/all/20260210152548.769951-1-loic.poulain@oss.qualcomm.com/ Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Kriskura176767
approved these changes
Feb 13, 2026
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Added support for RB4 USB changes