FROMLIST: mmc: host: sdhci-msm: Add support for wrapped keys

[arakshit011]

Add the wrapped key support for sdhci-msm by implementing the needed methods in struct blk_crypto_ll_ops and setting the appropriate flag in blk_crypto_profile::key_types_supported.

Tested on SC7280 eMMC variant.

How to test:

Use the "v1.3.0" tag from https://github.com/google/fscryptctl and build fscryptctl that supports generating wrapped keys.

Enable the following config options:
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_QCOM_INLINE_CRYPTO_ENGINE=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_MMC_CRYPTO=y

Enable "qcom_ice.use_wrapped_keys" via kernel command line.

$ mkfs.ext4 -F -O encrypt,stable_inodes /dev/disk/by-partlabel/vm-data $ mount /dev/disk/by-partlabel/vm-data -o inlinecrypt /mnt $ fscryptctl generate_hw_wrapped_key /dev/disk/by-partlabel/vm-data > /mnt/key.longterm $ fscryptctl prepare_hw_wrapped_key /dev/disk/by-partlabel/vm-data < /mnt/key.longterm > /tmp/key.ephemeral $ KEYID=$(fscryptctl add_key --hw-wrapped-key < /tmp/key.ephemeral /mnt) $ rm -rf /mnt/dir
$ mkdir /mnt/dir
$ fscryptctl set_policy --iv-ino-lblk-32 "$KEYID" /mnt/dir $ dmesg > /mnt/dir/test.txt
$ sync

Reboot the board

$ mount /dev/disk/by-partlabel/vm-data -o inlinecrypt /mnt $ ls /mnt/dir # File should be encrypted
$ fscryptctl prepare_hw_wrapped_key /dev/disk/by-partlabel/vm-data < /mnt/key.longterm > /tmp/key.ephemeral $ KEYID=$(fscryptctl add_key --hw-wrapped-key < /tmp/key.ephemeral /mnt) $ fscryptctl set_policy --iv-ino-lblk-32 "$KEYID" /mnt/dir $ cat /mnt/dir/test.txt # File should now be decrypted

Link: https://lore.kernel.org/all/20260102124018.3643243-1-neeraj.soni@oss.qualcomm.com/
qcom-next PR: qualcomm-linux/kernel-topics#551
Tested-by: Wenjia Zhang wenjia.zhang@oss.qualcomm.com
Signed-off-by: Neeraj Soni neeraj.soni@oss.qualcomm.com
Acked-by: Adrian Hunter adrian.hunter@intel.com
Reviewed-by: Eric Biggers ebiggers@kernel.org
Signed-off-by: Abhinaba Rakshit abhinaba.rakshit@oss.qualcomm.com
CRs-Fixed: 4492709

[shashim-quic]

@arakshit011

qcom-6.18.y-checkFailing after 1s — Change Requests Validation Check

This is failing because in CR mainline component is not associated with valid changes. This is to enforce mainline first policy without which merge is blocked.

[arakshit011]

Hello @shashim-quic
The change is already present in QLI 0.0 mainline. There was no CR associated with the mainline PR.
Hence, in the above CR, added the Change Task for mainline and marked NA. Let me know if that works fine.

[qcomlnxci]

Test Matrix

Test Case	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3	sm8750-mtp
0_qcom-next-ci-premerge-tests	◻️	◻️	◻️	◻️	◻️	◻️	❌ Fail
BT_FW_KMD_Service	❌ Fail	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass	❌ Fail
BT_ON_OFF	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	⚠️ skip
BT_SCAN	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
CPUFreq_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
CPU_affinity	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
DSP_AudioPD	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
Ethernet	✅ Pass	✅ Pass	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip
Freq_Scaling	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	❌ Fail
GIC	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
IPA	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Interrupts	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
OpenCV	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	◻️
PCIe	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
Probe_Failure_Check	❌ Fail	❌ Fail	✅ Pass	❌ Fail	❌ Fail	❌ Fail	❌ Fail
RMNET	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
UFS_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
USBHost	✅ Pass	✅ Pass	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail
WiFi_Firmware_Driver	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
WiFi_OnOff	✅ Pass	⚠️ skip	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
cdsp_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	❌ Fail
hotplug	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
irq	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
kaslr	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
pinctrl	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
qcom_hwrng	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
remoteproc	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail	✅ Pass	❌ Fail
rngtest	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
shmbridge	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
smmu	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass
watchdog	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
wpss_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass

[qcomlnxci]

Test jobs on dddf71e

• Job 68879 on lemans-evk
• Job 68874 on monaco-evk
• Job 68878 on qcs615-ride
• Job 68876 on qcs6490-rb3gen2
• Job 68877 on qcs8300-ride
• Job 68875 on qcs9100-ride-r3
• Job 68880 on sm8750-mtp

[sgaud-quic]

shmbridge and smmu test cases failed on monaco-evk, please check :
https://lava-oss.qualcomm.com/scheduler/job/68874#results_5560