Add RP2040 and STM32 support to build.sh

build.sh

@@ -54,6 +54,8 @@ case $1 in
     ;;
 esac
 
+# cache project config json for use in get_platform_for_env()
+PIO_CONFIG_JSON=$(pio project config --json-output)
 
 # get a list of pio env names that start with "env:"
 get_pio_envs() {
@@ -82,6 +84,21 @@ get_pio_envs_ending_with_string() {
   done
 }
 
+# get platform flag for a given environment
+# $1 should be the environment name
+get_platform_for_env() {
+  local env_name=$1
+  echo "$PIO_CONFIG_JSON" | jq -r '
+    .[] | 
+    select(.[0] == "env:'"$env_name"'") | 
+    .[1][] | 
+    select(.[0] == "build_flags") | 
+    .[1][] | 
+    select(test("ESP32_PLATFORM|NRF52_PLATFORM|STM32_PLATFORM|RP2040_PLATFORM")) |
+    sub("-D\\s*"; "")
+  ' | head -n 1    # only match first line, extends can cause duplicates if platform is defined in base env
+}
+
 # disable all debug logging flags if DISABLE_DEBUG=1 is set
 disable_debug_flags() {
   if [ "$DISABLE_DEBUG" == "1" ]; then
@@ -91,6 +108,8 @@ disable_debug_flags() {
 
 # build firmware for the provided pio env in $1
 build_firmware() {
+  # get env platform for post build actions
+  ENV_PLATFORM=($(get_platform_for_env $1))
 
   # get git commit sha
   COMMIT_HASH=$(git rev-parse --short HEAD)
@@ -121,27 +140,31 @@ build_firmware() {
   # build firmware target
   pio run -e $1
 
-  # build merge-bin for esp32 fresh install
-  if [ -f .pio/build/$1/firmware.bin ]; then
+  # build merge-bin for esp32 fresh install, copy .bins to out folder (e.g: Heltec_v3_room_server-v1.0.0-SHA.bin)
+  if [ "$ENV_PLATFORM" == "ESP32_PLATFORM" ]; then
     pio run -t mergebin -e $1
+    cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
+    cp .pio/build/$1/firmware-merged.bin out/${FIRMWARE_FILENAME}-merged.bin 2>/dev/null || true
   fi
 
-  # build .uf2 for nrf52 boards
-  if [[ -f .pio/build/$1/firmware.zip && -f .pio/build/$1/firmware.hex ]]; then
+  # build .uf2 for nrf52 boards, copy .uf2 and .zip to out folder (e.g: RAK_4631_Repeater-v1.0.0-SHA.uf2)
+  if [ "$ENV_PLATFORM" == "NRF52_PLATFORM" ]; then
     python3 bin/uf2conv/uf2conv.py .pio/build/$1/firmware.hex -c -o .pio/build/$1/firmware.uf2 -f 0xADA52840
+    cp .pio/build/$1/firmware.uf2 out/${FIRMWARE_FILENAME}.uf2 2>/dev/null || true
+    cp .pio/build/$1/firmware.zip out/${FIRMWARE_FILENAME}.zip 2>/dev/null || true
   fi
 
-  # copy .bin, .uf2, and .zip to out folder
-  # e.g: Heltec_v3_room_server-v1.0.0-SHA.bin
-  # e.g: RAK_4631_Repeater-v1.0.0-SHA.uf2
-
-  # copy .bin for esp32 boards
-  cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
-  cp .pio/build/$1/firmware-merged.bin out/${FIRMWARE_FILENAME}-merged.bin 2>/dev/null || true
+  # for stm32, copy .bin and .hex to out folder
+  if [ "$ENV_PLATFORM" == "STM32_PLATFORM" ]; then
+    cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
+    cp .pio/build/$1/firmware.hex out/${FIRMWARE_FILENAME}.hex 2>/dev/null || true
+  fi
 
-  # copy .zip and .uf2 of nrf52 boards
-  cp .pio/build/$1/firmware.uf2 out/${FIRMWARE_FILENAME}.uf2 2>/dev/null || true
-  cp .pio/build/$1/firmware.zip out/${FIRMWARE_FILENAME}.zip 2>/dev/null || true
+  # for rp2040, copy .bin and .uf2 to out folder
+  if [ "$ENV_PLATFORM" == "RP2040_PLATFORM" ]; then
+    cp .pio/build/$1/firmware.bin out/${FIRMWARE_FILENAME}.bin 2>/dev/null || true
+    cp .pio/build/$1/firmware.uf2 out/${FIRMWARE_FILENAME}.uf2 2>/dev/null || true
+  fi
 
 }
 

platformio.ini

@@ -59,6 +59,7 @@ platform = platformio/espressif32@6.11.0
 monitor_filters = esp32_exception_decoder
 extra_scripts = merge-bin.py
 build_flags = ${arduino_base.build_flags}
+  -D ESP32_PLATFORM
 ;  -D ESP32_CPU_FREQ=80          ; change it to your need
 build_src_filter = ${arduino_base.build_src_filter}